Tool Products
Simply stated, there are 4 fundamental reasons you should take a close look at the driven tooling designed and built by Von Ruden:
- These live tools deliver greater precision over extended working lives
- They eliminate interference issues often encountered with other designs
- Changeovers are fast with your choice of ER Collet or Kennametal® Quick Change interfaces as standards
- Optional 1500 PSI cooling lets you extend your feeds and speeds to their optimums
Greater Precision. Longer Lives. No Interference. How?
Unlike other driven tooling, all Von Ruden live tools are designed to extract maximum performance from specific machines. Since these M-spindles are machine-specific, each makes maximum use of that unit’s turret cone so it can have the largest possible diameter duplex bearings set around the clamping system.
The recessed spindle configurations common to all Von Ruden driven tools shorten the length of moment arm to yield longer bearing life — while still maximizing tool length. And their superior ABEC /P4 (minimum) spindle bearings deliver outstanding rigidity over exceedingly long working lives.
Working life, strength and quiet operation are all also enhanced by unsurpassed gear quality. The hardened, honed right-angle spiral bevel and spur cut gears used in all our M-spindles are produced in-house to standards seldom met by others.
Von Ruden Driven Tooling
Von Ruden Manufacturing, Inc. of Buffalo, MN introduces its line of tooling products for your DMG MORI equipment. Design parameters offer a recessed spindle while maximizing bearing capacities and location utilizing the maximum machine envelope without interference to adjacent tools.
This recessed spindle arrangement with larger bearing capacities and spread provides more rigidity so customers can utilize longer tooling, higher quality machining standards, larger load capacities and longer life — all translating into increased work-center profitability.
Offerings are for DMG MORI NL, NLX, NT, NTX, NZ, NZL and NZX series of machines. Within each of these machine series, we offer Right-Angle, Straight-Offset and Short-Straight drill/milling driven units. These units are available in 1:1, 1:2 and 2:1 ratios. Additional offerings include sealed bearings and 1500 PSI internal coolant.
All sales, design, manufacturing, repair and application assistance offered from our facility in Buffalo, MN providing localized and immediate service.
Von Ruden Driven Tooling
Von Ruden Manufacturing, Inc. of Buffalo, MN introduces its line of tooling products for your Haas equipment. Design parameters offer a recessed spindle while maximizing bearing capacities and location utilizing the maximum machine envelope without interference to adjacent tools.
This recessed spindle arrangement with larger bearing capacities and spread provides more rigidity so customers can utilize longer tooling, higher quality machining standards, larger load capacities and longer life all translating into increased work-center profitability.
Offerings are for Haas DS, SL, ST and TL series of machines. Within each of these machine series, we offer Right-Angle, Straight-Offset and Short-Straight drill/milling driven units. These units are available in 1:1, 1:2 and 2:1 ratios. Additional offerings include sealed bearings and 1500 PSI internal coolant.
All sales, design, manufacturing, repair and application assistance offered from our facility in Buffalo, MN providing localized and immediate service.
Von Ruden Driven Tooling
Von Ruden Manufacturing, Inc. of Buffalo, MN introduces its line of tooling products for your Mazak equipment. Design parameters offer a recessed spindle while maximizing bearing capacities and location utilizing the maximum machine envelope without interference to adjacent tools.
This recessed spindle arrangement with larger bearing capacities and spread have provided more rigidity so customers can utilize longer tooling, higher quality machining standards, larger load capacities and longer life all translating into increased work-center profitability.
Offerings are for Mazak HyperQuadrex, Multiplex and Quick Turn series of machines. Within each of these machine series, we offer Right-Angle, Straight-Offset and Short-Straight drill/milling driven units. These units are available in 1:1, 1:2 and 2:1 ratios. Additional offerings include sealed bearings and 1500 PSI internal coolant.
All sales, design, manufacturing, repair and application assistance offered from our
facility in Buffalo, MN providing localized and immediate service.
Von Ruden Driven Tooling
Von Ruden Manufacturing, Inc. of Buffalo, MN introduces its line of tooling products for your Okuma equipment. Design parameters offer a recessed spindle while maximizing bearing capacities and location utilizing the maximum machine envelope without interference to adjacent tools.
This recessed spindle arrangement with larger bearing capacities and spread provides more rigidity so customers can utilize longer tooling, higher quality machining standards, larger load capacities and longer life — all translating into increased work-center profitability.
Offerings are for Okuma ESL, LBEX, LB, LT, and LU series of machines. Within each of these machine series, we offer right-angle, straight-offset and short-straight drilling/milling driven units. These units are available in 1:1, 1:2 and 2:1 ratios. Additional offerings include sealed bearings and 1500 PSI internal coolant.
All sales, design, manufacturing, repair and application assistance offered from our facility in Buffalo, MN providing localized and immediate service.
VON RUDEN, MARIO PINTO AND SMW-AUTOBLOK LIVE TOOLING PARTNERSHIP
MARIO PINTO S.P.A. (“MPT”), established in Torino, Italy, in 1922 has been designing and producing chucks and clamping systems for markets worldwide. In 1999 MPT joined the SMW-AUTOBLOK group, a worldwide leader in clamping technology, maintaining its own catalogue and product range. In 2012, Von Ruden (VRM) and Mario Pinto (MPT) joined together with the support of SMW-Autoblok (SMW) to produce, distribute and support their combined product ranges on a global level.
MPT products are used worldwide in all fields: machine tool, automotive, aerospace, agriculture, mining, energy exploration, the pharmaceutical industry, the production of press machines, and more. MPT means quality and reliability, not only for the design and application of a wide range of products, but also for sales and after-sales service through our worldwide network of offices. Our research activities, the many patented products, our constant investment in human resources and in the most modern production means allow MPT to produce world class in a highly competitive and globalized market.